SKU: IWS10 10" 200W Pro Series In-Wall Home Theater Subwoofer, Easy Install & Paintable Grill, Single - IWS10
Few components add more to the home theater experience than a subwoofer. A subwoofer is designed to reproduce the lowest of audible frequencies and will give you that spine-tingling rumble effect that takes you out of reality and into the plot. The beauty of OSD Audio in-wall subs is that you'll experience that thunderous, room-filling bass without filling up floor space. An excellent in-wall subwoofer at an excellent price, the OSD-IWS10 is a 10-inch passive subwoofer with power handling up to 200 Watts. Installation is easy with our "easy in" mounting bracket that mounts to the sheet-rock after the cut-out hole has been made. The grille is also paintable to match your room decor and we include a cutout template that doubles as a paint shield.
Features:
- 10" Polypropylene Subwoofer
- Butyl Rubber Surround
- "Easy In" Mounting Bracket
- Integrated Rear Dust Shield
- Spray Paint-able Frame Grill
Amplifier Suggestions
Because this is a passive speaker, it will require a subwoofer amplifier to power it. An ideal match to this subwoofer is our OSD SMP500, a dedicated subwoofer amplifier that features 400W RMS @ 4 ohms, which would allow you to power 2 of these subwoofers wired in parallel. This subwoofer amplifier offers a variable high cut filter 30Hz-150Hz; front panel knob, and choice of signal level Input or LFE (Low-Frequency Effects).
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 10" In-Wall Subwoofer
- Woofer: 10" Polypropylene with Rubber Surround
- Frequency Response: 38Hz - 200Hz +/-3dB
- Power Handling: 200 Watts
- Sensitivity: 2.83V/1m: 86 dB
- Impedance: 8 Ohms
- Inputs: Spring Binding Posts
- "Easy In" Mounting Bracket for Easy Installation Included
- Paintable Grille & Frame Included
- Integrated Rear Dust Shield
- Sold As: Single
- Mounting Depth (Assuming .5" Drywall): 3.75"
- Unit Dimensions: (L x H x D) 12" x 12" x 3.75"
- Cutout Dimensions: (L x H) 10.62" x 10.62"
- Weight: 11 lbs
- Warranty: 10 Years
- *Note: Requires Additional Subwoofer Amplifier
View Owner's Manual
No Questions asked yet!